RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-1665001.png)
Control Arm Bushing: Service and Repair
REAR NO. 1 SUSPENSION ARM BUSHING REPLACEMENT
1. Remove bushing. Using Special Service Tool (SST) and a press, remove the bushing.
SST 09649 - 17010, 09710 - 30050
2. Install new bushing.
a. Place position mark on to a new bushing, as shown.
b. Using SST and a press, install the bushing.
SST 09710 - 30050
HINT:
^
Before installing the bushing, align the position mark and press line.
^
When assembling the bushing, assemble it so that its projections are horizontal.
^
Do not let grease or oil get on the bushing.