RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
Case: Service and Repair
EXTENSION HOUSING OIL SEAL REPLACEMENT
1. Drain transfer oil.
2. Remove propeller shaft.
3. Remove extension housing oil seal.
Using Special Service Tool (SST) 09308 - 00010 or equivalent, remove the oil seal.
4. Install extension housing oil seal.
a. Using SST 09325 - 20010 and a hammer, drive in a new oil seal.
Oil seal depth: 1.5 ± 0.4 mm (0.059 ± 0.016 in.)
b. Coat the lip of the oil seal with MP grease.
5. Install propeller shaft.
6. Fill transfer with oil.