RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-1303002.png)
3. Remove front oil seal and oil slinger.
a. Using SST, remove the oil seal.
SST 09308 - 10010
b. Remove the oil slinger.
4. Remove front bearing and bearing spacer.
a. Using SST, remove the front bearing.
SST 09556 - 22010
b. Remove the bearing spacer.
5. Install new bearing spacer and front bearing.
a. Install a new bearing spacer on the shaft.
b. Install the front bearing on the shaft.
6. Install oil slinger and new oil seal.
a. Install the oil slinger.
b. Using SST, install a new oil seal.
SST 09554 - 22010
Oil seal drive in depth: 2.0 mm (0.079 inch)
c. Apply MP grease to the oil seal lip.
7. Install companion flange.
