RAV4 4WD L4-2.0L (3S-FE) (1996)
Circuit Opening Relay: Testing and Inspection
A. Inspect relay continuity
-
Using an ohmmeter, check that there is continuity between terminals 1 and 2.
-
If there is no continuity, replace the relay.
-
Check that there is no continuity between terminals 3 and 5.
-
If there is continuity. replace the relay.
B. Inspect relay operation
-
Apply battery positive voltage across terminals 1 and 2.
-
Using an ohmmeter, check that there is continuity between terminals 3 and 5.
-
If there is no continuity, replace the relay.