RAV4 4WD L4-2.0L (3S-FE) (1996)
Shift Interlock Solenoid: Testing and Inspection
1. INSPECT SHAFT LOCK SOLENOID
-
Disconnect the solenoid connector.
-
Using an ohmmeter, measure the resistance between the terminals.
Standard resistance. 26 - 33 ohms
-
Apply battery positive voltage between the terminals.
-
Check that the solenoid can be heard operating.
2. INSPECT KEY INTERLOCK SOLENOID
-
Disconnect the solenoid connector.
-
Using an ohmmeter, measure the resistance between the terminals.
Standard resistance: 12.5 - 16.5 ohms
-
Apply battery positive voltage between the terminals.
-
Check that the solenoid can be heard operating.