toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Tank Removal and Installation|Page 3616 > < Emissions - Rough Idle/MIL ON/EVAP System DTC's Set|Page 3613
Page 1
background image

Fuel Tank: Service and Repair
Fuel Tank Removal and Installation

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:  Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.

3.  REMOVE FUEL TANK CAP
4.  REMOVE FRONT FLOOR COVER

a. Remove the nut, bolt, 3 clips and floor cover.

5. REMOVE NO. 1 FLOOR UNDER COVER

a. Remove the 2 nuts, clip and floor under cover.

6. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

a. Remove the 2 bolts and disconnect the parking brake cable.

7. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

Fuel Tank Removal and Installation|Page 3616 > < Emissions - Rough Idle/MIL ON/EVAP System DTC's Set|Page 3613