RAV4 4WD L4-2.4L (2AZ-FE) (2007)
/Page-13002.png)
Standard resistance
If the result is not as specified, replace the relay.
(c)
Install the relay.
5. INSPECT NO. 3 FAN RELAY (Marking: FAN NO. 3)
(a)
Remove the relay from the engine room No. 2 relay block.
(b) Measure the resistance of the relay.
Standard resistance
If the result is not as specified, replace the relay.
(c)
Install the relay.
6. INSTALL ENGINE ROOM NO. 2 RELAY BLOCK COVER
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
