RAV4 4WD L4-2.4L (2AZ-FE) (2007)
Starter Relay: Testing and Inspection
ON-VEHICLE INSPECTION
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE STARTER RELAY
a. Remove the starter relay from the No. 7 relay block.
3. INSPECT STARTER RELAY
a. Measure the resistance of the relay.
If the resistance is not as specified, replace the relay.
4. INSTALL STARTER RELAY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL