RAV4 4WD L4-2.4L (2AZ-FE) (2007)
3. REMOVE 4WD CONTROL ECU
(a)
Disconnect the connector.
(b) Remove the bolt and ECU.
INSTALLATION
1. INSTALL 4WD CONTROL ECU
(a)
Install the ECU with the bolt.
Torque: 4.5 Nm (46 kgf-cm, 40 inch lbs.)
(b) Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL