RAV4 4WD L4-2.5L (2AR-FE) (2009)
2. Using Techstream inspect the flow sensor.
NOTE
The A/C system will store DTC B1479 when a voltage value between 0.7 and 4.2 V is displayed continuously for more than 8.0 minutes.
^
If the flow sensor value does NOT change when switching the A/C system/blower ON and OFF and is stuck between 0.7 and 4.0 V go to step 4.
^
If the flow sensor voltage is normal go to step 3 (wire harness check).
3. Check the harness and connector (A/C compressor flow sensor - A/C amplifier).
A. Disconnect the B66 flow sensor connector.
B. Disconnect the E37 amplifier connector.