RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-487001.png)
Alignment: Service and Repair
Front Wheel Alignment
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
SUSPENSION: FRONT WHEEL ALIGNMENT: ADJUSTMENT
ADJUSTMENT
1. INSPECT TIRES
(a) Inspect the tires See: Wheels and Tires/Testing and Inspection/Component Tests and General Diagnostics.
2. MEASURE VEHICLE HEIGHT
NOTE: Before inspecting the wheel alignment, adjust the vehicle height to the specification.
(a) Press down on the vehicle several times to stabilize the suspension, and measure the vehicle height.
(b) Measure the front vehicle height.
(1) Measure the distance from the ground to the center of the lower suspension arm front mounting bolt.
(c) Measure the rear vehicle height.
(1) Measure the distance from the ground to the center of the body side No. 2 suspension arm mounting bolt.
Standard vehicle height (unloaded vehicle):
HINT:
-
*: w/ 3rd seat.
-
If the vehicle height is not as specified, press down on the vehicle several times to stabilize the suspension. Then measure the vehicle
height again.
3. INSPECT TOE-IN
