RAV4 4WD L4-2.5L (2AR-FE) (2009)
Control Module: Service and Repair
Removal
GF1A TRANSFER: 4WD CONTROL ECU: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
3. REMOVE 4WD CONTROL ECU
(a) Disconnect the connector.
(b) Remove the bolt and ECU.