RAV4 4WD V6-3.5L (2GR-FE) (2006)
A. Turn the key to "IG-ON" then back to "OFF". Remove the key from the ignition switch. Close all doors (Figure 2).
B. Using the remote control, press the unlock button one time. Open and close the driver's door within 30 seconds (Figure 3).
C. Wait for 5 minutes.
NOTICE
Verify that the amperage draw does NOT exceed the meter amperage rating. Otherwise, you may cause damage to the meter.
D. Place the negative (-) terminal of the multimeter to the negative (-) terminal post of the battery and the positive (+) terminal of the multimeter to
the clamp of the negative (-) terminal battery cable (Figure 4).
HINT