RAV4 4WD V6-3.5L (2GR-FE) (2006)
Step 1-2
Step 2(Continued)
INSPECTION PROCEDURE
NOTE:
-
Turn the ignition switch OFF before measuring the resistances of the main wire and the branch wire.
-
After the ignition switch is turned OFF, check that the key reminder warning system and light reminder warning system are not in operation.
-
Before measuring the resistance, leave the vehicle for at least 1 minute and do not operate the ignition switch, any switches or doors. If doors need
to be opened in order to check connectors, open the doors and leave them open.