RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-2121007.png)
5. INSTALL WINDSHIELD GLASS
a. Position the glass.
1. Using suction cups, place the glass in the correct position.
2. Check that the entire contact surface of the glass rim is perfectly even.
3. Place matchmarks on the glass and vehicle body on the locations indicated in the illustration.
HINT:
-
Placing matchmarks is only necessary when installing new glass. If it is the reused glass, matchmarks should already be present.
-
When reusing the glass, check and correct the match mark positions.
NOTE: Check that the stoppers are attached to the vehicle body correctly.
4. Using suction cups, remove the glass.
b. Using a brush, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply primer to the adhesive.
-
Throw away any leftover primer.
-
Do not apply too much primer.
