Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2486003.png)
(a) Engage the 3 claws to install the speaker to the door trim board.
2. INSTALL REAR NO. 1 SPEAKER ASSEMBLY
(a) Engage the 2 claws.
(b) Install the speaker with the 3 screws.
NOTICE:
Do not touch the cone part of the speaker.
(c) Connect the connector.
3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY RH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
4. INSTALL REAR UPPER DOOR ARMREST BASE PANEL RH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG RH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
6. INSTALL REAR DOOR FRAME GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly