Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2666008.png)
(b) Install a new No. 1 roof side mark as shown in the illustration.
Installation Position:
NOTICE:
Install the No. 1 roof side mark in an environment where the ambient temperature is over 20°C (68°F). If it is below 20°C (68°F),
using an infrared light, heat the rear door panel and the No. 1 roof side mark up to 20 to 30°C (68 to 86°F) and install the No. 1 roof
side mark.
Components
EXTERIOR PANELS / TRIM: NAME PLATE: COMPONENTS