Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2685011.png)
34. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)
(a) Disengage the 3 claws and remove the outer lap belt anchor cover.
(b) Remove the bolt and outer lap belt anchor.
(c) Remove the bolt and outer lap belt anchor.
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the cover.
(e) Remove the 2 bolts and 2 clips.