toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 8803 > < Components|Page 8801
Page 18
background image

HINT
Use the same procedure for both sides.

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the 2 assist grip covers.

(b) Disengage the 2 clips and remove the assist grip.

52. REMOVE ASSIST GRIP PLUG

(a) Insert a screwdriver with its tip wrapped in protective tape, into the service notch and break off the cap.

(b) Disengage the clip and remove the assist grip plug.

53. REMOVE ROOF HEADLINING REAR TRIM COVER LH

(a) Using a moulding remover D, disengage the 6 claws and remove the roof headlining rear trim cover.

54. REMOVE REAR VIEW INNER MIRROR STAY HOLDER COVER (w/ EC Mirror)   See: Mirrors/Service and Repair/Inner Rear View

Mirror/Removal

55. REMOVE ROOF HEADLINING ASSEMBLY (w/o Rear Seat Entertainment System)

Components|Page 8803 > < Components|Page 8801