Sequoia 2WD V8-4.6L (1UR-FE) (2010)
3. REMOVE FOLD SEAT SWITCH ASSEMBLY (for RH Side)
(a) Detach the 2 claws and remove the fold seat switch assembly.
4. REMOVE QUARTER TRIM COVER LH
HINT
Use the same procedure for the RH side and LH side.
5. REMOVE REAR POWER SEAT SWITCH (for LH Side)
HINT
Use the same procedure for the RH side and LH side.
6. REMOVE FOLD SEAT SWITCH ASSEMBLY (for LH Side)
HINT
Use the same procedure for the RH side and LH side.
7. REMOVE QUARTER TRIM REAR COVER LH (for Luggage Compartment)
(a) Using a screwdriver, detach the 3 claws and the guides and remove the quarter trim cover LH.
HINT
Tape the screwdriver tip before use.
(b) Disconnect the 2 connectors.
8. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment RH Seat)
(a) Detach the 2 claws and remove the fold seat switch assembly.