Sequoia 2WD V8-4.6L (1UR-FE) (2010)
(c) Remove the bolt and No. 3 parking brake cable from the rear axle carrier.
30. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
The No. 2 parking brake cable bolt locations are symmetric to those of the No. 3 parking brake cable, with the exception of the
locations indicated with "*A".
(a) Disconnect the No. 2 parking brake cable from the intermediate lever.
(b) Remove the 8 bolts and disconnect the No. 2 parking brake cable from the frame.
(c) Remove the bolt and the No. 2 parking brake cable from the rear axle carrier.