Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Cruise Control Module: Service and Repair
Installation
CRUISE CONTROL: DISTANCE CONTROL ECU: INSTALLATION
1. INSTALL DISTANCE CONTROL ECU ASSEMBLY
(a) Install the distance control ECU with the bolt.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
NOTICE:
Do not install the distance control ECU assembly if it has been damaged or received some sort of shock.
(b) Connect the connector.
2. INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) See: Heating and Air Conditioning/Housing Assembly HVAC/Service
and Repair/Removal and Replacement/Front Air Conditioning Unit/Installation
3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Knee Airbag Assembly (for Driver Side)/Installation
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Installation
5. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Installation
6. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INITIALIZE DISTANCE CONTROL ECU
(a) Initialize the distance control ECU See: Testing and Inspection/Programming and Relearning.