Sequoia 2WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_2wd/v8-4.6l_(1ur-fe)/Page-2251001.png)
Solar Sensor: Testing and Inspection
HEATING / AIR CONDITIONING: SOLAR SENSOR: INSPECTION
1. INSPECT SOLAR SENSOR (AUTOMATIC LIGHT CONTROL SENSOR)
(a) Remove the solar sensor with the connector still connected.
(b) Apply battery voltage between terminals 6 (CLTB) and 3 (CLTE) of the A/C solar sensor.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(d) If the result is not as specified, replace the solar sensor.
HINT
*
As the inspection light is moved away from the sensor, the voltage increases.
*
Use an incandescent lamp for inspection. Bring it within 30 cm (11.8 in.) of the solar sensor.