Sequoia 2WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_2wd/v8-4.6l_(1ur-fe)/Page-2959001.png)
Cigarette Lighter: Service and Repair
Removal
POWER OUTLETS (INT): CIGARETTE LIGHTER: REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Front Console Box/Removal
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Front Console Box/Removal
3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box/Removal
4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL See: Dashboard / Instrument Panel/Service and Repair/Removal
5. REMOVE CIGARETTE LIGHTER COVER
(a) Remove the cigarette lighter cover.
6. REMOVE CIGARETTE LIGHTER ASSEMBLY
(a) Remove the cigarette lighter knob and element.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the cigarette lighter socket and retainer assembly.
7. REMOVE CIGARETTE LIGHTER INDICATOR LENS