Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Parking Brake Warning Switch: Testing and Inspection
PARKING BRAKE: PARKING BRAKE SWITCH: ON-VEHICLE INSPECTION
1. REMOVE PARKING BRAKE SWITCH ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Parking Brake Pedal/Service
and Repair/Overhaul/Disassembly
2. CHECK PARKING BRAKE SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the parking brake switch assembly.
3. INSTALL PARKING BRAKE SWITCH ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Parking Brake Pedal/Service
and Repair/Overhaul/Reassembly