Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-1094066.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - NO. 4 JUNCTION
CONNECTOR)
OK -- Continue to next step.
16. CONNECT CONNECTOR
(a) Reconnect the O41 No. 4 junction connector.
NEXT -- Continue to next step.
17. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 4 JUNCTION CONNECTOR - SUSPENSION CONTROL ECU)
(a) Disconnect the O42 No. 4 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: