Sequoia 2WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_2wd/v8-4.6l_(1ur-fe)/Page-1096082.png)
NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (SUSPENSION CONTROL ECU)
OK -- Continue to next step.
18. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 4 JUNCTION CONNECTOR - COMBINATION METER ECU)
(a) Disconnect the O41 No. 4 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (COMBINATION METER ECU)
OK -- REPAIR OR REPLACE NO. 4 JUNCTION CONNECTOR
19. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - NO. 4 JUNCTION CONNECTOR)
(a) Disconnect the H91 No. 1 junction connector.