Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2267004.png)
Tire size:
Must exceed the following dimensions
Width
185 mm (7.28 in.)
Inner diameter
360 mm (14.2 in.)
(2) Tie the lower No. 1 instrument panel airbag to the tire with several wire harnesses.
CAUTION:
*
Make sure that the wire harnesses are tight. If there is slack in the wire harnesses, the lower No. 1 instrument panel airbag may
become loose due to the shock when the airbag is deployed.
*
Always tie down the lower No. 1 instrument panel airbag with the airbag deployment side facing inside the tire.
NOTICE:
As the tire may be damaged by the airbag deployment, use a tire that you are planning to throw away.
(d) Connect SST connector to the lower No. 1 instrument panel airbag.
SST : 09082-00780
(e) Place tires.
(1) Place at least 2 tires under the tire which the lower No. 1 instrument panel airbag is tied to.
(2) Place at least 2 tires over the tire which the lower No. 1 instrument panel airbag is tied to. The top tire should have a disc wheel installed.
NOTICE:
*
Do not place SST connector under the tires because it could be damaged.
*
As the disc wheel may be damaged by the airbag deployment, use a disc wheel that you are planning to throw away.
*
As the tires may be damaged by the airbag deployment, use tires that you are planning to throw away.
(3) Tie the tires together with 2 wire harnesses.