Sequoia 2WD V8-4.6L (1UR-FE) (2010)
(a) Remove the bolt and remove the rear seat inner belt assembly.
Installation
SEAT BELT: REAR NO. 1 SEAT INNER BELT ASSEMBLY: INSTALLATION
HINT
*
Use the same procedure for the LH side and RH side.
*
The procedure listed below is for the RH side.
1. INSTALL REAR SEAT INNER BELT ASSEMBLY
(a) Install the rear seat inner belt with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
(a) Install the rear No. 1 seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 1 Seat
Assembly/Installation.
Components
SEAT BELT: REAR NO. 2 SEAT INNER BELT ASSEMBLY (for LH Side): COMPONENTS