Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Seat Memory Switch: Service and Repair
Removal
SEAT: SEAT MEMORY SWITCH: REMOVAL
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Disassembly
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
3. REMOVE FRONT ARMREST BASE UPPER PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
5. REMOVE SEAT MEMORY SWITCH
(a) Remove the 2 screws and seat memory switch.