Sequoia 2WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_2wd/v8-4.6l_(1ur-fe)/Page-428001.png)
Headlamp Dimmer Switch: Service and Repair
Removal
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: REMOVAL
1. REMOVE SPIRAL CABLE SUB-ASSEMBLY
(a) Remove the spiral cable sub-assembly See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair/Removal.
2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
NOTICE:
Do not press the claw too hard, as it may be damaged.
3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the headlight dimmer switch, as shown in the illustration.
(c) Disengage the 2 claws and remove the headlight dimmer switch.