Sequoia 2WD V8-4.6L (1UR-FE) (2010)
(a) Using SST, install the companion flange.
HINT
Use the propeller shaft installation nuts when mounting SST on the flange
SST : 09950-30012
09951-03010
09953-03010
09954-03010
09956-03020
SST : 09955-03050
(b) Coat the threads of the nut with hypoid gear oil.
(c) Using SST to hold the companion flange.
SST : 09330-00021
(d) Using a socket wrench (30mm), tighten the nut until the standard preload is reached.
Torque : 441 Nm (4497 kgf-cm, 325 ft-lbf or less)
NOTICE:
*
As there is no spacer, tighten the nut a little at a time, being careful not to overtighten it.
*
Install nuts on the bolts to protect them, as shown in the illustration.
(e) Using a torque wrench, measure the preload of the backlash between the drive pinion and ring gear.