Sequoia 2WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_2wd/v8-4.6l_(1ur-fe)/Page-1473001.png)
Differential Mount: Service and Repair
Removal
AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL
1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
See: Differential Carrier/Service and Repair/Removal and Replacement/Removal
2. REMOVE SPARE WHEEL STOPPER
(a) Remove the 4 bolts and spare wheel stopper.
3. REMOVE NO. 1 REAR DIFFERENTIAL MOUNT CUSHION
(a) Using SST, remove the No. 1 rear differential mount cushion.
SST : 09570-60010
NOTICE:
*
Do not bring the SST into contact with the subframe.
*
Do not slant the bolts of SST.
*
Set the SST in the correct direction.
*
Screw the 2 bolts of SST equally into the 2 holes of the rear differential mount.