Sequoia 2WD V8-4.6L (1UR-FE) (2010)
(c) Using a snap ring expander, install a new snap ring.
(d) Align the matchmarks placed before removal, and install the cage to the inner race.
(e) Install the 6 balls.
HINT
Apply grease onto the balls to keep them from falling out.
(f) Pack the inboard joint shaft and boot with grease from the boot kit.
Standard grease capacity:
380 to 400 g (13.4 to 14.1 oz.)
(g) Align the matchmarks placed before removal, and install the inboard joint shaft to the outboard joint shaft.