Sequoia 2WD V8-4.6L (1UR-FE) (2010)
(b) Using SST, pinch the clamp.
SST : 09521-24010
NOTICE:
Do not overtighten SST.
5. INSTALL REAR DRIVE SHAFT OUTBOARD JOINT BOOT CLAMP
(a) Install the outboard joint boot clamp onto the outboard joint boot.
(b) Using SST, pinch the clamp.
SST : 09521-24010
NOTICE:
Do not overtighten SST.
6. INSPECT AND ADJUST OUTBOARD JOINT BOOT CLAMP
(a) Using SST, inspect and adjust the clearance of the boot clamps.
SST : 09240-00020
Standard Clearance:
7. TEMPORARILY INSTALL REAR DRIVE SHAFT INBOARD JOINT BOOT
(a) Wrap the spline of the outboard joint shaft with vinyl tape to prevent the boots from being damaged.