Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Quarter Window Glass: Service and Repair
Removal
WINDOW / GLASS: QUARTER WINDOW GLASS: REMOVAL
HINT
*
Use the same procedure for both the RH and LH sides.
*
The procedure described below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE ROOF HEADLINING ASSEMBLY (w/o Rear Seat Entertainment System)
(a) Remove the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
3. REMOVE ROOF HEADLINING (w/ Rear Seat Entertainment System)
(a) Remove the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
4. REMOVE ROOF HEADLINING (w/ Sliding Roof)
(a) Remove the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
5. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY
(a) Disengage the 4 clips and remove the roof side rail garnish.
6. REMOVE QUARTER WINDOW GLASS