Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-3360001.png)
Wiper Motor: Testing and Inspection
Rear Wiper Motor
Inspection
WIPER / WASHER: REAR WIPER MOTOR: INSPECTION
1. INSPECT REAR WIPER MOTOR
(a) Check the operation.
(1) Connect the positive battery (+) lead to terminal 5 (L) and the negative battery (-) lead to terminal 4 (E), and check that the rear wiper
motor operates.
OK:
The rear wiper motor operates.
(2) If the result is not as specified, replace the motor.
On-Vehicle Inspection
WIPER / WASHER: REAR WIPER MOTOR: ON-VEHICLE INSPECTION
1. INSPECT REAR WIPER MOTOR
(a) Check the automatic stop position.
(1) Operate the rear wiper motor, then stop the operation.
(2) Check the automatic stop position when the rear wiper motor operation has stopped.
OK: