Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-1558002.png)
3. INSPECT SEAT HEATER CUSHION CONTINUITY
a. Heat the thermostat with a light.
b. Inspect the seat heater cushion continuity between terminals, as shown.
If continuity is not as specified, replace the seat cushion pad.
4. INSPECT SEAT BACK CONTINUITY
a. Heat the thermostat with a light.
b. Inspect the seat heater cushion continuity between terminals, as shown.
If continuity is not as specified, replace the seat back pad.