Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-996001.png)
Vacuum Brake Booster: Service and Repair
REMOVAL
1. REMOVE MASTER CYLINDER
2. DISCONNECT VACUUM HOSE FROM BRAKE BOOSTER
3. DISCONNECT 2 VACUUM SWITCH CONNECTORS FROM BRAKE BOOSTER
4. REMOVE FRONT DOOR SCUFF PLATE, COWL SIDE TRIM BOARD, SIDE PANEL, LOWER FINISH PANEL AND NO. 2 HEATER TO
REGISTER DUCT
5. REMOVE PEDAL RETURN SPRING
6. REMOVE CLIP AND CLEVIS PIN