Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-49003.png)
2.
Remove the combination meter.
A.
Remove the 4 screws.
B.
Remove the combination meter and disconnect the 3 connectors.
Replace combination meter computer:
1.
Remove the rear plate of the combination meter and install the NEW combination meter computer.
2.
Install the combination meter in the vehicle using the reverse orders of the steps in the "Remove Combination Meter" section of the Repair
Procedure.
3.
Confirm proper operation of the combination meter.
