toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Collision / Non-Collision Inspections|Page 1144 > < Impact Sensor|Locations|Page 1141
Page 1
background image

Impact Sensor: Testing and Inspection
Collision / Non-Collision Inspections

INSPECTION

1. Vehicles not involved in collision:

INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.*

2. Vehicles involved in collision:

INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.*
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following

items even if the airbag was not deployed;
-

Check the bracket deformation.

-

Check the paint peeling off the bracket.

-

Check the cracks, dents or chips in the case.

-

Check the cracks, dents, chipping and scratches in the connector.

-

Check the peeling off of the label or damage to the serial number.

* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes in Air Bag Systems; Testing and Inspection.

Collision / Non-Collision Inspections|Page 1144 > < Impact Sensor|Locations|Page 1141