Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2560001.png)
Parking Assist Switch: Service and Repair
Installation
PARK ASSIST / MONITORING: CLEARANCE SONAR MAIN SWITCH: INSTALLATION
1. INSTALL DRIVE MONITOR SWITCH
(a) Attach the 2 claws to install the drive monitor switch.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH
(a) Attach the 7 claws to install the side panel.
5. INSTALL COWL SIDE TRIM BOARD LH
(a) Attach the 2 clips to install the cowl side trim board.
(b) Install the clip.
6. INSTALL FRONT DOOR SCUFF PLATE LH
(a) Attach the 9 claws to install the front door scuff plate.