Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Remove the 2 bolts.
(b) Remove the speaker and disconnect the connector.
NOTICE:
Do not touch the cone part of the speaker.
7. REMOVE NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 14 Speakers)
(a) Disengage the 6 clips and 2 claws and remove the speaker panel.
8. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)
(a) Remove the 2 bolts.
(b) Remove the speaker and disconnect the connector.
NOTICE:
Do not touch the cone part of the speaker.
Installation
AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION
1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)
(a) Connect the connector.
(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.