Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(c) Install the speaker with the 2 bolts.
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
NOTICE:
*
Do not touch the cone part of the speaker.
*
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.
5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Engage the 4 clips and claw to install the speaker panel.
6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Engage the 4 clips and claw to install the speaker panel.
7. INSTALL FRONT PILLAR GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
8. INSTALL FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation