Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Parking Assist Switch: Service and Repair
Removal
PARK ASSIST / MONITORING: CLEARANCE SONAR MAIN SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH
(a) Detach the 9 claws and remove the front door scuff plate.
2. REMOVE COWL SIDE TRIM BOARD LH
(a) Remove the clip.
(b) Detach the 2 clips and remove the cowl side trim board.
3. REMOVE INSTRUMENT SIDE PANEL LH
(a) Using a moulding remover, detach the 7 claws and remove the side panel.
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal
6. REMOVE DRIVE MONITOR SWITCH
(a) Detach the 2 claws and remove the drive monitor switch.