Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2694002.png)
Use the same procedure as for the front side.
6. REMOVE NO. 3 SIDE STEP BRACKET
HINT
Use the same procedure as for the front side.
7. REMOVE STEP COVER REINFORCEMENT
HINT
Use the same procedure as for the front side.
Reassembly
EXTERIOR PANELS / TRIM: SIDE STEP: REASSEMBLY
1. INSTALL SIDE STEP BRACKET
(a) Install the side step bracket with the 2 bolts.
Torque : 13 Nm (127 kgf-cm, 9.2 ft-lbf)
2. INSTALL NO. 2 SIDE STEP BRACKET
HINT
Use the same procedure as for the front side
3. INSTALL NO. 3 SIDE STEP BRACKET
HINT
Use the same procedure as for the front side
4. INSTALL STEP COVER REINFORCEMENT
HINT
Use the same procedure as for the front side
5. INSTALL STEP ARM SPACER
(a) Engage the guide and install the step arm spacer.
6. INSTALL STEP COVER PROTECTOR