Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2699003.png)
HINT
Install the clamp within the angle range shown in the illustration.
E. Inspect for exhaust gas leak.
3. Replace bumper cover.
Refer to the Technical Information System (TIS) applicable model and model year Repair Manual:
Technical Service Bulletin # SB0334-10
Date: 101124
Body - Rear Bumper Cover Is Deformed Near Exhaust Pipe
T-SB-0334-10
November 24, 2010
Rear Bumper Cover Deformed
Service Category
Vehicle Exterior
Section
Exterior Panels/Trim
Market
USA