Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Pushing the front door outside handle assembly in the direction of the arrow mark shown in the illustration, install the front door outside handle
assembly.
6. INSTALL FRONT DOOR LOCK See: Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Front Door Lock/Installation
7. INSTALL DOOR LOCK CYLINDER (for Driver Side)
(a) Engage the 2 claws and install the door lock cylinder onto the front door outside handle cover.
8. INSTALL FRONT DOOR OUTSIDE HANDLE COVER
(a) Using "TORX" socket wrench T30, install the front door outside handle cover.
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
(b) Install the hole plug.
9. INSTALL FRONT DOOR PANEL PROTECTOR
(a) Engage the 8 clips and install the front door panel protector.
10. INSTALL FRONT DOOR WEATHERSTRIP
(a) Engage the 39 clips and install the front door weatherstrip.