Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
14. INSTALL FRONT DOOR FRAME FRONT LOWER SUB-ASSEMBLY
(a) Install the front door frame front lower sub-assembly with the 2 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
15. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY
(a) Apply MP grease to the sliding and rotating areas of the front door window regulator.
NOTICE:
Do not apply grease to the window regulator spring.
(b) Loosely screw bolt A onto the front door window regulator
(c) Insert the front door window regulator into the door panel. Provisionally tighten bolt A to hang the front door window regulator on the door
panel.
NOTICE:
Do not drop the window regulator as it may be damaged.
(d) Install the front door window regulator with the 5 bolts, and tighten bolt A.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(e) Connect the connector.
16. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
(a) Insert the door glass into the door panel by the arrows in the illustration.