Sequoia 4WD V8-4.6L (1UR-FE) (2010)
7. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY
(a) Remove the 3 screws and remove the rear door inside handle sub-assembly.
8. REMOVE REAR DOOR GLASS INNER WEATHERSTRIP
(a) Raise the 8 claws of the rear door glass inner weatherstrip and then remove the rear door glass inner weatherstrip from the rear door trim board
sub-assembly, as shown in the illustration.
9. REMOVE REAR NO. 1 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Rear Door Speaker/Removal
10. REMOVE REAR DOOR TRIM NO. 2 BRACKET
(a) Remove the 2 screws and remove the rear door trim No. 2 bracket.
11. REMOVE REAR DOOR SERVICE HOLE COVER
(a) Disengage the clamps and disconnect the connectors.